Moldex Half Mask & P3 Protective Filter - 7000 reusable half face masks offering minimum maintenance with P3 cartridges Mask body made of soft, TPE material which is gentle on the skin, Easy maintenance and cleaning without tools. With EasyLock® filter system: easy handling. No additional adapters or parts necessary, Moldex 7000 Half Mask & P3 Filter (Code 700P3)
ALTERNATIVE STOCK PRODUCT JSP FORCE 8 & PRESS TO CHECK FILTERS
Moldex Half Mask & P3 Protective Filter - 7000 reusable half face masks offering minimum maintenance with P3 cartridges
Mask body made of soft, TPE material which is gentle on the skin, Easy maintenance and cleaning without tools
With EasyLock® filter system: easy handling
No additional adapters or parts necessary
FFP3 masks provide protection against solid and liquid aerosols and smoke containing the following materials such as: Asbestos, calcium carbonate, china clay, cement, cellulose, sulfur, cotton, flour, carbon, ferrous metals, hardwood, silicon, plastic, vegetable oils and mineral oils, copper, aluminum, bacteria, fungi, Mould spores and mycobacterium tuberculosis (T.B.), chromium, manganese, nickel, platinum, strychnine, metal dust and smoke, viruses such as Avian flu and enzymes.
ALTERNATIVE STOCK PRODUCT JSP FORCE 8 & PRESS TO CHECK FILTERS
Delivery Options:
FREE DELIVERY OVER £ 75 NET
Half mask respirators enclose both the nose & mouth & as such are termed half masks. Half masks are made from natural or synthetic rubber that allows sufficient flexibility for facial contours. Every half mask is required to reach the EN 140:1998 safety standard & will protect against both very fine particulates & gases when used with the correctly selected mask filters for the hazard.
Half mask respirators with the P3 filter (FFP3 Equivalent) provide an APF 20 which is the correct grade of protection against viruses such as Covid 19 & SARS.
Half masks have been designed to be worn for long periods however as per HSE guidance regular breaks should be taken after less than an hour of continuous use as the RPE may start to feel uncomfortable. This reduces the risk that the user will loosen the straps thus reducing the seal & protection.
All half mask respirators used on a regular basis should be thoroughly checked at least once a month. If the half mask dust respirator is only used occasionally it should be examined carefully before use.
Depending on the filter selected, Half face masks will provide an APF 4 (P1 Filter), APF 10 (P2 Filter) & an APF 20 (P3 Filter).
Half masks will also protect against gases/vapours including organic/inorganic fumes & acid gases as well as ammonia & mercury. The correct fume filter for the hazard encountered can be found in our mask filter category.
Half mask respirators should not be used in oxygen deficient environments.
Always follow the manufacturers RPE advice when using the mask however generally a good seal can be checked by covering the inlet valve / filter with your hand, inhaling & holding your breath for circa 10 seconds. The mask suction should not loosen. If it does loosen readjust the head hardness straps & retry until a good seal has been achived.
It is the company’s legal responsibility to ensure their RPE wearers have been face fitted. Protective Masks Direct ltd provide face fitting across the whole of the UK.