Elipse Half Mask Filters
Frequently Asked Questions
01. Are Elipse mask filters replaceable?
Yes. Both the standard Elipse P3 filters and the combination A1P3/ABEK1P3 filters are designed to be replaced once saturated or the seal is broken. The particulate element is permanently bonded to the carbon layer on combination filters, so the whole filter unit is swapped as one piece rather than in separate parts.
02. What's the difference between Elipse P3 and A1P3 filters?
P3 filters protect against dust, fumes and mists only, filtering at least 99.95% of fine particles. A1P3 filters add an activated carbon layer for organic vapour protection alongside particulate filtration, making them suitable for tasks involving both dust and solvent-based fumes, such as spray painting or resin work.
03. How do I change the filters on an Elipse half mask?
Twist and remove the used filter from the mask body, taking care not to touch the inner face seal. Fit the new filter by aligning it with the mount and twisting until secure. Always check the filter is undamaged and correctly seated before use, and replace both filters together as a matched pair.
04. How often should Elipse mask filters be replaced?
Replace particulate (P3) filters when breathing becomes noticeably harder or the filter is visibly clogged or damaged. Combination filters with a carbon layer, such as A1P3 or ABEK1P3, should also be replaced once you notice smells or tastes passing through, even if particulate filtration still feels fine.
05. What does ABEK1P3 protect against?
ABEK1P3 filters combine four gas/vapour classes with P3 particulate filtration: A for organic vapours, B for inorganic gases, E for acid gases (including sulphur dioxide), and K for ammonia, plus dust, mist and fume protection. It's suited to tasks involving mixed chemical and particulate exposure.
06. Can I use Elipse filters on any half mask?
No. Elipse filters are designed specifically for the GVS Elipse mask body and its dedicated twist-fit mount, and are not interchangeable with bayonet-fit systems used by other brands such as 3M or Moldex. Always match filters to the specific mask range to ensure a secure fit and correct protection factor.
07. Do Elipse filters have a shelf life?
Yes. Unopened filters carry a use-by date on the packaging, typically several years from manufacture when stored in cool, dry conditions away from direct sunlight. Once fitted and in use, particulate and combination filters should be assessed regularly for clogging, damage or breakthrough rather than relied on until the printed date.
08. What's the difference between Elipse and Elipse Integra masks?
The standard Elipse is a half mask covering the nose and mouth. The Elipse Integra adds an integrated polycarbonate eye shield attached to the mask body, combining respiratory and eye protection in one unit. Both use the same replaceable filter range, including P3, A1P3 and ABEK1P3 options.