Mask Filters And Gas Cartridges
We stock the full range of mask filters & fume cartridges for protection against fine dust particulates & fumes.
PROTECTION LEVELS:
A1 - Organic gases and vapours, boiling point > 65°C Working with solvents created by varnish, paints and adhesives 1000PPM
A2 - Organic gases and vapours, boiling point > 65°C Working with solvents created by varnish, paints and adhesives 5000PPM
ABE1 -Organic & Inorganic gases and vapours & Acids, boiling point > 65°C Working with solvents created by varnish, paints and adhesives & chlorine,bromine, hydrogen sulphide, hydrochloric acid and other acids 1000PPM
ABEK1 -Organic & Inorganic gases and vapours & Acids, boiling point > 65°C Working with solvents created by varnish, paints and adhesives & chlorine,bromine, hydrogen sulphide, hydrochloric acid and other acids& Ammonia
ABEK1 HG P3 RD -Organic & Inorganic gases and vapours & Acids, boiling point > 65°C Working with solvents created by varnish, paints and adhesives & chlorine,bromine, hydrogen sulphide, hydrochloric acid and other acids& Ammonia & P3 Particulates plus Mercury (50 hrs Maximum use against Mercury.
Particulate filters: P1 R, P2 R, & P3 R
Please click on the relevant manufacturer, 3m Filters, Elipse Filters, Filterpsec Filters, JSP Filters, Moldex Filters & Sundstrom Filters & Cartridges and use the drop down menu to select the mask fume cartridges you require
-
![Corpro F1100 P3R Filter]( "Corpro F1100 P3R Filter")
Corpro F1100 P3R Filter
Corpro FFP3 filter for use with the FFM1600 Full Face Mask & HM1400 half mask. P3 Protection Levels. Ultra Low breathing resistance & with easy filter attachment to mask unit.£7.85 -
![Press To Check Compact P3 Filters & Odour Layer]( "Press To Check Compact P3 Filters & Odour Layer")
Press To Check Compact P3 Filters & Odour Layer
The new to the JSP Filter range, the unencapsulated Press to check P3 filters filters with ozone odour layer providing both P3 protection and protection from from nuisance smells/odours. (PMD F-3103)£7.92 -
![Sundstrom SR 597 A1B2E2K1 Combination Filter]( "Sundstrom SR 597 A1B2E2K1 Combination Filter")
Sundstrom SR 597 A1B2E2K1 Combination Filter
The Sr 597 combination filter protects against organic & inorganic fumes, Acid gases & Vapours (E2B2 Higher concentration) Designed for use with the Sundstrom SR 500 & Sundstrom SR 500 EX powered air units£60.11 -
![Sundstrom SR 599 ABEKHGP3 Filter]( "Sundstrom SR 599 ABEKHGP3 Filter")
Sundstrom SR 599 ABEKHGP3 Filter
The Sundstrom SR 599 filter provides protection against organic & inorganic fumes, acid gases, ammonia & mercury.£65.00 -
![Sundstrom SR 315 ABE1 Gas Filter]( "Sundstrom SR 315 ABE1 Gas Filter")
Sundstrom SR 315 ABE1 Gas Filter
The filter can be used with both the Sundstrom half mask and full face mask. The SR 315 ABE1 filter can also be combined with the with the P3 particle filter, the SR 510 P3 filter to provide a combined ABE1P3 protection level for spray painting.£12.49 -
![Sundstrom SR298 AX Filter]( "Sundstrom SR298 AX Filter")
-
![Sundstrom SR 299-2 ABEK1HGP3 Filter]( "Sundstrom SR 299-2 ABEK1HGP3 Filter")
Sundstrom SR 299-2 ABEK1HGP3 Filter
Full protection against Organic / inorganic fumes and acid gases, Ammonia, Mercury & the highest level of particulate & aerosol vapour protection. For use with the Sundstrom Full Face Mask & Half Masks.£25.99 -
![Sundstrom SR221 Pre Filter]( "Sundstrom SR221 Pre Filter")
Sundstrom SR221 Pre Filter
Prefilter Should Always Be Used For Particle, Gas And Combined Filters.Sundstrom SR221 Pre Filter The pre-filter protects the main filter against premature clogging by larger particles.The Sundstrom SR221 Pre Filter should always be used for particle, gas and combined filters.Code H02-0312 Price: £ 2.89 ex vat£2.88 -
![Sundstrom P3 Particle filter SR 510 P3 R]( "Sundstrom P3 Particle filter SR 510 P3 R")
Sundstrom P3 Particle filter SR 510 P3 R
The Sundstrom P3 Particle filter SR 510 P3R is a mechanical filter with extremely low inhalation resistance. The SR 510 protects against all types of particles (dust, fume, fog, spray, asbestos), even bacteria, viruses, and radioactive pollution & can be combined with other Sundström filter respirator products for combinations filter protection. CODE H02-1312 :
£8.70 -
![3m 6057 ABE1 Filters]( "3m 6057 ABE1 Filters")
3m 6057 ABE1 Filters
The 3M 6057 ABE1 Filters protect against organic vapours, inorganic vapours, and acid gases. 3m 6000 filter & 3m 7000 filter. Code: 6057
LIMITED PHYSICAL NOW STOCK AVAILABLE
ORDER NOW
£10.20 -
![Press To Check P3 JSP Particulate Filter (Force 8 / Force 10) (Code BMN990-001-700 )]( "Press To Check P3 JSP Particulate Filter (Force 8 / Force 10) (Code BMN990-001-700 )")
Press To Check P3 JSP Particulate Filter (Force 8 / Force 10) (Code BMN990-001-700 )
PressToCheck P3 R D Filters BMN990-001-700How can you be sure that you have donned your mask correctly? With the new patent pending Force8 PressToCheck filters you can instantly check that you have the correct seal every time.Award winningWinner of the BSIF Product Innovation Award. See Respiratory Director Matthew Judson accept the award on behalf of JSP Ltd Click hereComfortFIT IT!Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.PRESS IT!PressToCheck - Press the front and backs of both filter covers together to stop air from entering through the filters.CHECK IT!Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
ORDER NOW
£10.95 -
![P3 JSP Particulate Filter (Force 8 / Force 10) (Code F8-003)]( "P3 JSP Particulate Filter (Force 8 / Force 10) (Code F8-003)")
P3 JSP Particulate Filter (Force 8 / Force 10) (Code F8-003)
P3 Particulate Filter (Pair) (Force 8 Force 10) (Code F8-003)£10.95 -
![A1 P2 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-112)]( "A1 P2 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-112)")
A1 P2 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-112)
A1 P2 Combination Cartridge - Organic gases and vapours, boiling point > 65°C Working with solvents created by varnish, paints and adhesives 1000PPM (Pair) (Force 8 Force 10) P2 Particulate Protection(Code F8-112)£11.01 -
![A2P3 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-123)]( "A2P3 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-123)")
A2P3 JSP Combination Cartridges (Force 8 / Force 10) (Code F8-123)
A2P3 Press to check Combination Cartridge - Organic gases and vapours, boiling point > 65°C Working with solvents created by varnish, paints and adhesives 1000PPM (Pair) (Force 8 Force 10)P2 Particulate Protection(Code F8-123) A2P3 R Press to check filter£22.00 -
![Elipse P3 Filters (Pair) (SPR316)]( "Elipse P3 Filters (Pair) (SPR316)")
Elipse P3 Filters (Pair) (SPR316)
Elipse P3 Twin Filters for SPR299 Mask - EN143 (SPR 316) Protection against silica dust, asbestos fibres and other fine dusts. 99.95% filtration
IN PHYSICAL STOCK
ORDER ONLINE NOW
MINIMUM ORDER 2 PAIRS
£10.42
Featured
Frequently Asked Questions
01: What vapour or particulate filters are required?
Organic fume Filters are graded depending on the concentration of contaminant. Class 1 is up to 1000ppm, Class 2 is up to 5000 ppm & class 3 up to 10,000 ppm.
Combination filters ie mask filters that act as both fume filters & particulate filters protect against both gases/vapours and particulates must meet the relevant standards for each element.
02: How long do mask filters last?
The length of the service life of the mask filter is dependent on a number of factors:
- Concentration of contaminant (The dustier / higher contamination in the environment the more frequently the mask filter will need to be changed)
- Air humidity / Air temperature
- How hard the mask wearer is breathing
03: What are the particulate filter grades?
Particulate filters are classified according to the level of filtering efficiency & protection that they provide.
The filters will be either be P1 (Low filter efficiency), P2 (Medium filter efficiency) or P3 (High filter efficiency & protection.
04: What do particulate filters protect against?
P filters can be used to provide filter protection from both solid particles as well as fine mists and sprays. The size of particulate that is filtered will range from a particle size of 5 microns for a P1 down to as low as 0.3 microns for a P3 filter. (High level protection)
Any particles or fibres are held within the filter as well as the fine sprays or mist generated from aerosol procedures.
05: What examples of solid materials do P filters protect against?
Depending on the P filter selected, the hazardous particulates may include:
- Viruses & Bacteria (P3 Filter)
- Asbestos dust (P3 filter)
- Silica (P3 filter)
- Lead dust (P3 filter)
- Fungal spores (P2 filter)
- Flour (P2 filter)
- Wood Dust (Soft Wood P2 filter, Hard Wood P3 filter)
06: What examples of spray or mists do P filters protect against?
Liquid sprays & mists that P filters protect against include:
- Spray Paints
- Pesticides
- Powder coating
- Chrome acid
- Oil mists
07: What is a P3 filter?
P3 levels are the highest rated level of P filter and is used in conjunction with either a Half Mask or Full Face Mask for protection against highly toxic or irritant particulates, vapours & viruses. P3 filters
An APF protection level of 20 APF when used with a Half Mask & 40 APF when the P3 filter is used with a Full Face Mask.
08: When do you know when to change a particulate filter?
Particulate filters should be changed when breathing resistance becomes difficult (ie breathing resistance created through the blocking of the filter)
09: When should I change my P3 filter?
P3 filters should be changed when breathing resistance is encountered. This is dependent on the level of contaminant encountered.
10: When do you know when to change a gas/vapour/ fume filter?
Gas / vapours / fume filters should be changed as soon as “smell breakthrough” occurs (ie safe levels of contaminant smelt/tasted)
N.B for substances with no smell or taste i.e low warning properties supplied air respirators should be used rather than masks & filters since any “smell breakthrough” cannot be detected. i.e isocyanates.
11: What mask filter would I require to protect against Aceton?
Fume Filter Type AX:
An AX Filter type is required providing protection from gase & vapours from organic compounds boiling point <65 degrees.
12: What Fume filters are required for handling solvent vapours when painting and varnishing?
Fume Filter Type A:
An organic fume filter cartridge Type A organic filter providing protection from gases & vapours from organic compounds, boiling point >65 degrees. (Use in combination with a P filter (Particulate filter)
13: What mask filter protection do I need for welding processes?
Fume Filter Type B:
A filter Type B protection is required. A filter including Type B will provide protection against inorganic gases & vapours & acid gases. (For example, Chlorine, hydrogen sulphide & hydrocyanic acid.
Should be used in combination with a P mask filter (Particulate filter) -ABE-P filter.
14: What mask filter protection do I need for welding processes?
Fume Filter type E:
Acid gases are released which require adequate RPE to be worn. An ABE-P (Ie gas & fume filter) is required to protect against acid gases and fumes to include Sulphur Dioxide & Hydrogen Chloride.
15: What mask filter do I need for ammonia & liquid fertilisers?
Fume Filter Type K:
The filter including K will protect against Ammonia & organic ammonia derivatives. If powdered fertiliser is used or vapours are created the mask filter should also be used with a P Filter. (P3 filter)
ABEK1 – P, ABEK, ABE, ABEK1P3.
16: What filter will protect me against Carbon monoxide?
The filter CO will protect against carbon monoxide. These are used with escape hoods to protect against gase during fires or for handling hydrogen peroxide.
17: What filters do I require to protect against Mercury Vapour?
Fume Filter type HG:
A filter containing HG will protect against mercury vapour. This must be included with P filter to protect against chemicals Ie ABEKHGP3 filter.
18: What filter do I need to protect against fine dusts & viruses?
Particulate Filter Type P:
A P filter is required to protect against dusts. A P3 filter is required to protect against very fine dusts & to provide protection against viruses.