We stock the full range of FFP3 masks (P3 Masks) from all major brands including 3m FFP3 face masks, Alpha Solway, Moldex & JSP protective masks.
All our FFP3 Disposable Dust masks are CE Certified EN149:2001+A1:2009 & provide the highest level of respiratory protection available filtering particles as small as 0.3 microns (Virus) providing APF 20 protection (Highest Level) against highly toxic solid & liquid hazardous materials. All respiratory masks have been selected for their comfort and secure face fit.
FFP3 Face Mask with Valve- The dolomite tested 9632 mask providing low breathing resistance
Non Valved FFP3 Face Mask - HY 9330
Fold flat FFP3 Disposable Mask – UCI P3
Small FFP3 Respirator – Alpha S3-V
FFP3 Face Mask (P3) Protection: Viruses such as SARS, Covid-19, Asbestos & Silica dust & other hazards classified toxic.
FFP3 Dust Mask Protective Level: APF 20 x TLV, 50c NPF xTLV minimum 99% filtration Level.
The non valved FFP3 mask is used by many UK NHS Trusts. Individually sealed, the fold flat mask is a 3-panel design allowing excellent movement whilst providing the highest FFP3 protection. One of the best antiviral face masks.
This valved FFP3 fold flat mask is both light and comfortable with a tri-fold design offering the highest level of p3 protection. (minimum order 4)
3M Aura Flat-Fold Valved Particulate Respirator (9332) 3M 9300+ series has an advanced three-panel design making it easier to breathe through. Optimum comfort ensuring improved wearer acceptance during long work hours. As a foldable mask they offer you more convenience than traditional cup shaped P3 respirator. (Box 10 Valved Fold Flat Face Masks)
The FFP3 respirator mask X310SV (Pack 5) has an internal sealing foam lining to ensure that the mask provides an excellent fit for most face shapes. Valved for comfort and easily adjustable straps and nose clip for a good fit on even the smaller face.
The ever popular 3m Aura 9332+ 3m FFP3 Mask (Pack 5), provide comfortable p3 protection with low breathing resistance. A market leading FFP3 Dust Mask from 3M.
The 3m 9330+ (Pack 5 FFP3 Non-Valved Fold Flat Masks) are one the the most popular 3m Aura masks. Well made and strong. An excellent face fit. A very popular antiviral face mask.
Compact fold flat P3 dust mask with inner foam for comfort and improved face fit. Dolomite tested to ensure breathing comfort in the most dustiest environments.
One our top selling dolomite tested FFP3 Masks , with inner seal for excellent face fitting. Dolomite loaded to stop clogging in the dustiest environments ensuring comfort & low breathing resistance. Excellent for Asbestos work or other environments with dangerous hazards.
Ultimate Valved Fold Flat Disposable FFP3 Masks - Pack of 10 - (UCI-UCF-P3V) Fully UK certified to EN149:2001 +A1:2009. Adjustable nose bridge and soft flexible face seal-ensure a secure fit. Virus, Mould Spore, Asbestos Protection.
The 3M 8835+ Dust Mask P3 respirator mask combines optimal comfort with increased performance. A soft inner seal provides and excellent face fit. One of the main selling 3M Masks.
The HY9632 is a recommended alternative product in stock now
This small FFP3 Disposable Mask, protects against toxic particles including viruses, bacteria and asbestos and is an appropriate fit to smaller face sizes. The mask integrates an innovative filter system to minimise breathing resistance, reduces heat and moisture build-up and meets the requirements of EN149:2001+A1:2009. This mask is not designed for individuals with facial hair as this prevents the formation of a tight face-respirator seal.
Sundstrom SR100 half mask (Inc P3 Filter) is made of silicone with each mask equipped with two exhalation valves, which ensure very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit. Tested in accordance with EN 140:1998. Nominal protection factor 50. P3 Filters included. Price £ 33.74 Ex Vat.
JSP Force 8 Half Mask with Typhoon Valve & Press To Check P3 Cartridges offers superior low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force 8 filters giving the Force 8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours. Price £ 21.50 Ex VAT
A filtering facepiece classified as FFP3 is the most effective against coronavirus. Crafted from synthetic fibre, a well-fitted P3 face mask has the potential to protect against inward leakage and capture very fine toxic particles. It also includes an exhalation valve that releases air, to prevent heat and moisture build-up. An FFP3 disposable mask combined with social distancing and frequent hand washing can offer optimal protection against potential virus transmission.
According to the World Health Organisation (WHO), a surgical face mask must be used if you are continuously coughing or sneezing. Also, FFP3 respirators are required when conducting infectious aerosol-generating procedures or taking care of a patient with confirmed or suspected coronavirus. Meanwhile, a face-covering is recommended when stepping out on an errand at places where it’s difficult to maintain physical distancing.
Our FFP3 graded masks provide the highest level of protection available for respirator masks in the UK. A P3 mask will filter at least 99% of particles from 0.3 microns in size upwards & an APF 20.
FFP1 & FFP2 masks have less efficient filtration levels circa 80% & 94% as well as only filtering larger particle sizes.
This depends entirely on the hazard encountered. A P3 face mask will always provide a higher level of protection than an FFP2 Respirator & will filter 99% of particles as small as 0.3 microns. FFP2 masks filter at least 94% of airborne materials however the size of particulate filtered tends to be larger at between 2-5 microns.
An FFP2 respirator will protect against slightly toxic substances whereas an FFP3 face mask will protect against toxic solid aerosols & dust.
The maximum duration of a P3 face mask may vary as per design specifications and manufacturer guidelines. The recommended wear time in a single shift is up to 8 hrs in optimal working condition however it is best to have a break each hour. If the FFP3 respirator is a poor fit, damaged, has become tainted or is causing discomfort and breathing problems, it should be removed and discarded safely in waste bins.
FFP3 Respirator masks will protect against particles as small as 0.3 microns in size upwards.
The FFP3 Face mask used for protection against hazardous viruses has a limited shelf life. The components of a product that has been in prolonged storage are likely to degrade which can impact its quality and level of performance. The expiration date is printed on the side or bottom of the packaging. If the FFP3 disposable mask has expired, the mask should not be used as it doesn’t meet the stringent criterion set by the health regulators.
N100 is an American safety standard (NIOSH) and the equivalent of the UK safety standard FFP3 Face mask. An N100 respirator is the American NIOSH safety standard. All FFP3 disposable masks should be stamped as FFP3 to be allowed to be sold in the UK.
All tight fitting face masks should be face fitted A fit test of FFP3 respirators is vital to ensure health caregivers get complete protection against penetration of contaminated air in high-risk areas. Given the rapid progression of the Covid-19 outbreak, fit checking of respirators by trained personnel may not always be possible.
FFP3 is the UK & European protective standard with FFP3 protection the highest grade of protection available providing the user with a 99% filtration with an APF 20 x TLV. The FFP3 masks provide protection for toxic dust/aerosols such as asbestos, silica dust and viruses.
The HSE (Health & Safety Executive) recommend the use of FFP3 Graded masks against viruses as the highest level of respiratory protection equipment available with a protection level of at least 20 APF.
FFP3 dust masks will protect against very fine dust, toxic dusts & aerosols for example asbestos, powdered pesticides, hard wood dusts, lead, chromium & lime as well as viruses such as SARS, bird flu & Covid 19.
Protects against:
Asbestos, calcium carbonate, china clay, cement, cellulose, sulphur, cotton, flour, carbon, ferrous metals, hardwood, silicon, plastic, vegetable oils and mineral oils, lead paint, copper, aluminium, bacteria, fungi, Mould spores and mycobacterium tuberculosis (T.B.), chromium, manganese, nickel, platinum, strychnine, metal dust and smoke, viruses such as Avian flu, Swine Flu, Coronavirus, Sars and enzymes.
FFP3 is the European safety standard (UK) for protective masks. This protective grade of mask is used in dangerous environments providing the highest level of protection available at APF 20x TLV. FFP3 dust masks provide protection against very fine toxic dusts & aerosols including asbestos fibres, silica dust & viruses.
The FFP3 standard is the highest protective FFP Mask (filtering Face Piece) available providing 99% filtering efficiency with only 2% inward leakage & and APF 20 x TLV.
Masks can either be disposable masks or reusable masks with FFP3 protective filters. An FFP3 disposable mask must be stamped FFP3 (Protection Level) & correctly CE certified for this level or protection.
Any job requiring the highest level of protection would require a P3 mask. Examples of jobs requiring FFP3 Respirator masks would be Construction, groundworks, healthcare & low grade asbestos work.