Reusable Masks
Reusable Dust Masks & Respirators
We offer reusable face mask to protect you and your staff while working in factories and workplaces that have high incidences of fine dust, lead, silica, asbestos, MDF particles, or other forms of industrial pollutants in the air. The reusable respirator mask is designed to offer comfort, to allow the least amount of distraction while working on the job at hand. Our reusable respirator mask also comes with multiple air filters that offer the highest level of FFP3 protection. These FFP3 masks filter out 99% of particles during breathing & are cleanable offering better value for your investment. Since you can re-use them multiple times, these reduce the overall industrial waste, helping create a greener planet.
-
![Drager 3300 & A2P3 Protective Mask]( "Drager 3300 & A2P3 Protective Mask")
Drager 3300 & A2P3 Protective Mask
The Drager half mask with encapsulated A2P3 filters ensure protection both from organic fumes as well as fine particulates & Aerosols P3 (FFP3 Protection). This combination is reusable mask & A2P3 Filter.£37.08 -
![Respirator Face Mask Antiseptic Cleaning Wipes (50 Pack)]( "Respirator Face Mask Antiseptic Cleaning Wipes (50 Pack)")
Respirator Face Mask Antiseptic Cleaning Wipes (50 Pack)
Antiseptic wipes can be used to clean all Full Face Dust Masks & Respirators. Will not dry out even if stored in warm conditions. (SR5226) Each antiseptic wipe is individually foil wrapped & complies with current regulations requiring cleaning of non-disposable respiratory equipment after use. Supplied in packs of 50.
£11.00 -
![Sundstrom Spray Painters Kit]( "Sundstrom Spray Painters Kit")
Sundstrom Spray Painters Kit
The Sundstrom Spray Painters kit contains everything you need for most spray paint & adhesive applications all in a handy container.£48.51 -
![Elipse P3 Protective Respiratory Mask(SPR501)]( "Elipse P3 Protective Respiratory Mask(SPR501)")
Elipse P3 Protective Respiratory Mask(SPR501)
Elipse Half Mask (SPR501)The Elipse Half Face Mask P3 (FFP3 masks) is latex and silicone free and is comfortable to wear for long periods of time.The Elipse SPR501 FFP3 respirator mask comes with a pair of P3 filters providing protection against fine toxi dust particles, metal fumes (smoke), asbestos, oil & water mists, bacteria & viruses.Approved to European Standard EN405: 2001. With P3 APF: 20.+ A1:2009Elipse twin filter ready to wear half maskLatex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of timeLow profile filters provide unobstructed field of vision.
IN PHYSICAL STOCK
ORDER ONLINE NOW
£24.52 -
![JSP Force 8 Half Mask & P3 Press to Check Particulate Protection]( "JSP Force 8 Half Mask & P3 Press to Check Particulate Protection")
JSP Force 8 Half Mask & P3 Press to Check Particulate Protection
JSP Force 8 Half Mask with Typhoon Valve & Press To Check P3 Cartridges offers superior low breathing resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force 8 filters giving the Force 8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours. Price £ 21.50 Ex VAT
£21.50 -
![JSP Full Face Mask- Force 10 Full Face Mask]( "JSP Full Face Mask- Force 10 Full Face Mask")
JSP Full Face Mask- Force 10 Full Face Mask
The Force10 is a full face twin cartridge mask with Class 3 heavy duty filter connections. The completely clear panoramic visor maximises light levels within the mask giving optimum visibility. The lens also offers impact protection and has anti-mist and anti-scratch coating as standard. The mask offers superior comfort with its 5-point suspension harness and quick release buckles, making it easy to adjust. The mask moulds to the shape of the face for an excellent seal, and is also padded for extra comfort over prolonged use.
£80.17 -
![3M 7500 Half Mask]( "3M 7500 Half Mask")
3M 7500 Half Mask
The 3M 7500 half-mask is reusable, durable, and comfortable, due to its silicone design, making it ideal for individuals requiring a mask for long periods. The integrated Cool Flow™ valve minimises moisture and heat build-up. This product is compatible with all the 3M™ series filters.
MEDIUM ONLY AVAILABLE
£28.50 -
![3M 4251 Half Mask Respirator]( "3M 4251 Half Mask Respirator")
3M 4251 Half Mask Respirator
The comfortable and lightweight 3M 4251 half mask offers A1 P2 protection against particulate hazards and organic vapours, whilst requiring no additional parts or maintenance. Suitable for work involving paints, solvents and adhesives.£21.50 -
![3M 6000 Series Half Mask Respirator]( "3M 6000 Series Half Mask Respirator")
3M 6000 Series Half Mask Respirator
The 3M 6000 Series Half Mask Respirator is very lightweight with a twin filter design for even weight distribution and can be used with a range of different protective filters.
CURRENTLY MEDIUM SIZE ONLY
£19.67 -
![3m 6000 Full Face Mask]( "3m 6000 Full Face Mask")
3m 6000 Full Face Mask
The 3M 6000 Series Full Face Mask is approved to EN 136 Class 1 Standards and is both well balanced and comfortable to wear.
A full range of protective 3m Gas cartridges & particulate filters is available.
MEDIUM SIZE
£94.00 -
![Asbestos Half Mask & P3 Filters]( "Asbestos Half Mask & P3 Filters")
Asbestos Half Mask & P3 Filters
Asbestos Half Mask & Asbestos Particulate filters offers low resistance and a 4-point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The asbestos mask uses the correct grade asbestos filter to ensure that you are fully protected against harmful asbestos fibres. Also wear correct asbestos PPE for protection.£21.50 -
![Sundstrom SR100 Half Mask & P3 Filter]( "Sundstrom SR100 Half Mask & P3 Filter")
Sundstrom SR100 Half Mask & P3 Filter
Sundstrom SR100 half mask (Inc P3 Filter) is made of silicone with each mask equipped with two exhalation valves, which ensure very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit. Tested in accordance with EN 140:1998. Nominal protection factor 50. P3 Filters included. Price £ 33.74 Ex Vat.
£33.74 -
![SR Chemical Spray Mask]( "SR Chemical Spray Mask")
SR Chemical Spray Mask
The Chemical Spray Mask Kit comes in a handy storage box & contains half mask, correct grade filters for agricultural spraying & use in sewage treatment plants, & waste recycling.£49.34 -
![JSP Force 8 Respirator Half Mask]( "JSP Force 8 Respirator Half Mask")
JSP Force 8 Respirator Half Mask
JSP Force 8 Half Mask Respirator
The twin cartridge half mask has a 4 point harness for a secure fit and ease of use
, with a typoon valve for low breathing resistance. Available in 3 sizes. Used in conjunction with the range of JSP Filters & Cartridges.
£17.50 -
![Drager X-plore 3300+ 10 Half Masks]( "Drager X-plore 3300+ 10 Half Masks")
Drager X-plore 3300+ 10 Half Masks
Low profile 3300+ reusable half mask with offering both a comfortable fit and easily adjustable head harness. Encapsulated A2P3 filters available.
PHYSICAL STOCK ORDER NOW
£18.17
Frequently Asked Questions
Protective masks, respiratory equipment (RPE) is divided into 2 main areas: (A) Filtering face Pieces (FFP) & (B) Air Supplied Equipment.
Additional information can be found within each category section:
01: What's the difference between FFP1, FFP2 and FFP3 Disposable masks?
The European safety standard EN149: 2001 + A1: 2009 for disposable protective masks includes performance tests in filter penetration; extended exposure test; flammability; breathing resistance and total inward leakage. Masks that meet this standard are classified according to their filtering efficiency & protection as FFP1, FFP2, FFP3.
FFP1 (80% Filter efficiency) Protection from non‐toxic contaminants in concentrations up to 4 x OEL or 4 x APF. Particles filtered are larger than 5 microns Dust, Fumes, Aqueous mists, Oils based mists.
FFP2(94% Filter efficiency) Protection from low to average toxicity contaminants in concentrations up to 12 x OEL or 10 x APF . Particle size filtration 2-5 microns - Fine dust, Aqueous / Oil-based mists.
FFP3 (99% Filter efficiency) Protection from toxicity contaminants in concentrations up to 50 x OEL or 20 x APF. Particles size less than 2 microns - Very fine dust, Fibres, Aqueous/ Oil-based mists.
Dolomite test for clogging signifies a mask with low breathing resistance in very dusty environments.
02: What are the safety standards for Reusable Half Masks?
Half mask respirators (Reusable masks) are required to meet the European standards EN140, EN141, 143 and EN371.
The European standard - EN140 covers the technical specifications for half masks. A half mask is defined as covering the nose, mouth & chin.
EN141 European standard -Gas filters for protection against specified gases and vapours or combined filters for protection against solids and/or liquid particles & specified gases and vapours.
Filters are classified as Class 1, Class 2 & Class 3 .
EN143 European standard - Filters for protection against particulates. These are classified according to their filtering efficiency P1, P2 & P3. P3 filters provide the highest level of filtration.
EN371 European standard - AX filters.
P1 (80% Filter efficiency) Protection from non‐toxic contaminants in concentrations up to 4 x OEL or 4 x APF. Particles larger than 5 microns Dusts, Fumes, Aqueous mists, Oils based mists.
P2(94% Filter efficiency) Protection from low to average toxicity contaminants in concentrations up to 12 x OEL or 10 x APF . Particle size filtration 2-5 microns - Fine dust, Aqueous / Oil-based mists.
P3(99% Filter efficiency) Protection from toxicity contaminants in concentrations up to 50 x OEL or 20 x APF. Particles size less than 2 microns - Very fine dust, Fibres, Aqueous/ Oil-based mists.
03: What are the safety standards for Full Face Masks?
EN136 European standard for Full Face masks. Negative pressure, powered or supplied air systems.
Full face masks are classified as:
Class 1 - Light Duty & Maintenance
Class 2 – General Duty & Maintenance
Class 3 – Heavy Duty – Fire Service
Full face masks when used with particulate filters provide the following APF protection levels. P2 filter APF 10 & P3 filter APF 40 when used with a full face mask.
04: What are the different types of powered air respirators?
The European safety standards for powered air respirators are the EN146 & EN12941 standard with the powered respirators classified into three protective categories, TH1, TH2 & TH3. (Turbo Hood)
The powered respirator includes hood & powered air unit.
The powered air respirators are a recommended solution as a dust mask for bearded personnel.
TH1P provides an APF protection factor of 10 (APF 10) & TH2P provide an APF protection factor of 20 (APF 20)
05: What is an air-fed respirator?
European standards EN270 & EN1835 incorporates the Helmet/hood (Covers the face) supplied with breathable air from a compressed air unit as well as the respirators operation. The adjustable continuous flow valve must incorporate a low warning device.
Standard EN1835 covers three classes LDH1, LDH2 & LDH3 (LDH=Light Duty Hose). The maximum permissible length of air line (Valve (Regulator) to the Air source (Compressor) is 30 metres EN270) & 10 metres EN1835.