Full Face Masks
Get Branded Full Face Dust Masks & Respirators
We stock a full range of the main branded Full Face Masks such as the JSP Force 10 Full Face Respirator that utilises the award-winning press to check filters to ensure a correct face seal is achieved. The Sundstrom SR 200 respirator is one of the most advanced respirators available that is both ultra-lightweight & extremely versatile & can be used with either filters alone or with a powered air unit if required & finally the ever-popular 3M 6000 Series Full Face Mask with great visibility.
Exclusive Range of High-Quality Full Face Respirator Masks
We also stock the full range of gas & particulate filters whatever your protection requirements for all of the full face dust masks & respirators. These can be found in our mask filter category with a useful filter selection guide can be found to ensure you select the correct protective filter.
Full Face Mask
If you require a half-mask respirator or a disposable dust mask, please refer to our relevant category.
The full-face respirator masks are sold without filters unless otherwise stated. All masks and filters are held in stock for next-day delivery.
Full Face Respirator Comparison Guide
SPECIAL OFFER
FREE FILTERS WITH THE JSP FORCE 10 FULL FACE MASK
Frequently Asked Questions
01: What is a Full Face Mask?
Full face respirator masks cover the full face & provide protection from hazardous particles, gases as well as providing protection for the eyes with a panoramic protective screen. A Full Face Respirator with filters will protect against highly toxic hazards including fumes & fine toxic dust.
02: What safety standards are there for Full Face Dust Masks?
In the UK, Full Face Dust Masks & Respirators are classified to the EN136 standard and used in negative pressure systems. These are classified into 3 classes:
Class 1 – Light duty
Class 2 – General duty
Class 3 – Heavy-duty protection
03: Do Full Face Respirator Masks provide a higher level of protection than Half Face masks?
Full Face masks provide protection for the whole face including the eyes and mouth and are recommended for very dusty environments. The correct mask filters (Gas/Particulate filters) need to be selected depending on the hazard encountered however P3 Filters provide an increased protection level APF 40 when used with a full face mask respirator.
04: Do I require a face fit test for a Full Face Mask / Full Face RPE ?
Personnel that use Full Face Dust Mask Respirators are required to have passed a face fit test. This face fit test must be quantitative only as per HSE recommendations. Qualitative face fit tests cannot be used.
05: Can I wear a Full Face Mask if I have a beard?
This is dependent on the degree of growth. Limited growth would be fine with a non powered Full Face Respirator as long as there is no beard growth where the mask seals around the face. An enclosed powered air system is recommended as a specific Full Face Mask for Beards.
06: What filters are required for Full Face Masks?
The mask filters required are dependent on the hazard encountered. These maybe gas & vapour filters or particulate.
A Organic fumes
B Inorganic fumes
E Sulphur Dioxide
K Ammonia Green
P Particle White
The full range of Full Face Mask filters can be found in our filter section.