JSP - We offer the full range of the best selling JSP Dust mask range from FFP1 Dust Masks through to FFP3 grade including the FilterSpec Eye & Respiratory Protection Masks.
If there are any masks that are not listed please call us and we shall provide these for you.
The peel-off protective visors ensure that your visor is shielded from scratches and abrasions caused by debris, chemicals, or accidental impacts as well as extending the life or the visor saving you time and money on replacements.
Learn MoreHorizontal fold-flat mask FFP1 face mask- 315 Typhoon Horizontal fold flat shape for better fitting and clearer vision as well as convenience and ease of use. Extremely low breathing resistance, extremely low CO2 and heat build-up, and extremely low moisture build-up. Hygienically individually packed. Conforms to EN149:2001+A1:2009360° Comfort Foam Welded Nose Piece. Latex Free
Learn MoreJSP Force 8 Half Mask Respirator
The twin cartridge half mask has a 4 point harness for a secure fit and ease of use
, with a typoon valve for low breathing resistance. Available in 3 sizes. Used in conjunction with the range of JSP Filters & Cartridges.
Learn MoreFFP3 Graded and also includes a carbon layer for nuisance smells and fumes such as welding Fumes & Lead Fumes
Pack 10 FFP3 Dust Masks with Carbon layer
Learn MoreJSP Force 8 Half Mask with Typhoon Valve & replaceable P2 filters Included. The twin cartridge half mask offers superior low breathing resistance and a 4-point suspension harness with quick-release buckles. The mask is made with a durable thermoplastic rubber providing a superior fit to most face shapes. The mask accepts the full range of low profile Force8 filters giving the Force8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
Learn MoreProtective masks, respiratory equipment (RPE) is divided into 2 main areas: (A) Filtering face Pieces (FFP) & (B) Air Supplied Equipment.
Additional information can be found within each category section:
The European safety standard EN149: 2001 + A1: 2009 for disposable protective masks includes performance tests in filter penetration; extended exposure test; flammability; breathing resistance and total inward leakage. Masks that meet this standard are classified according to their filtering efficiency & protection as FFP1, FFP2, FFP3.
FFP1 (80% Filter efficiency) Protection from non‐toxic contaminants in concentrations up to 4 x OEL or 4 x APF. Particles filtered are larger than 5 microns Dust, Fumes, Aqueous mists, Oils based mists.
FFP2(94% Filter efficiency) Protection from low to average toxicity contaminants in concentrations up to 12 x OEL or 10 x APF . Particle size filtration 2-5 microns - Fine dust, Aqueous / Oil-based mists.
FFP3 (99% Filter efficiency) Protection from toxicity contaminants in concentrations up to 50 x OEL or 20 x APF. Particles size less than 2 microns - Very fine dust, Fibres, Aqueous/ Oil-based mists.
Dolomite test for clogging signifies a mask with low breathing resistance in very dusty environments.
Half mask respirators (Reusable masks) are required to meet the European standards EN140, EN141, 143 and EN371.
The European standard - EN140 covers the technical specifications for half masks. A half mask is defined as covering the nose, mouth & chin.
EN141 European standard -Gas filters for protection against specified gases and vapours or combined filters for protection against solids and/or liquid particles & specified gases and vapours.
Filters are classified as Class 1, Class 2 & Class 3 .
EN143 European standard - Filters for protection against particulates. These are classified according to their filtering efficiency P1, P2 & P3. P3 filters provide the highest level of filtration.
EN371 European standard - AX filters.
P1 (80% Filter efficiency) Protection from non‐toxic contaminants in concentrations up to 4 x OEL or 4 x APF. Particles larger than 5 microns Dusts, Fumes, Aqueous mists, Oils based mists.
P2(94% Filter efficiency) Protection from low to average toxicity contaminants in concentrations up to 12 x OEL or 10 x APF . Particle size filtration 2-5 microns - Fine dust, Aqueous / Oil-based mists.
P3(99% Filter efficiency) Protection from toxicity contaminants in concentrations up to 50 x OEL or 20 x APF. Particles size less than 2 microns - Very fine dust, Fibres, Aqueous/ Oil-based mists.
EN136 European standard for Full Face masks. Negative pressure, powered or supplied air systems.
Full face masks are classified as:
Class 1 - Light Duty & Maintenance
Class 2 – General Duty & Maintenance
Class 3 – Heavy Duty – Fire Service
Full face masks when used with particulate filters provide the following APF protection levels. P2 filter APF 10 & P3 filter APF 40 when used with a full face mask.
The European safety standards for powered air respirators are the EN146 & EN12941 standard with the powered respirators classified into three protective categories, TH1, TH2 & TH3. (Turbo Hood)
The powered respirator includes hood & powered air unit.
The powered air respirators are a recommended solution as a dust mask for bearded personnel.
TH1P provides an APF protection factor of 10 (APF 10) & TH2P provide an APF protection factor of 20 (APF 20)
European standards EN270 & EN1835 incorporates the Helmet/hood (Covers the face) supplied with breathable air from a compressed air unit as well as the respirators operation. The adjustable continuous flow valve must incorporate a low warning device.
Standard EN1835 covers three classes LDH1, LDH2 & LDH3 (LDH=Light Duty Hose). The maximum permissible length of air line (Valve (Regulator) to the Air source (Compressor) is 30 metres EN270) & 10 metres EN1835.