Series 7000 reusable half masks offering minimum maintenance. Different gas and particulate filters can be combined.Mask body made of soft, TPE material which is gentle on the skin,Easy maintenance and cleaning without toolsWith EasyLock® filter system: easy handlingNo additional adapters or parts necessary (Mask Only)
ALTERNATIVE STOCK PRODUCT JSP FORCE 8 & PRESS TO CHECK FILTERS
The sleek new 7000 half mask respirator introduces unique features and benefits for increased worker acceptance. Light weight design plus extra-wide sealing area provides all-day comfort. Mask drops down for convenient storage around the neck or locks down for custom fit. Adjustable head cradle and curved neck buckles for extra comfort. Low profile, compact design allows a wide field of vision, fits well under welding helmets and with safety glasses. Maintenance and cleaning are made simple with very few replacement parts. Available pre-assembled with the most popular cartridge/filter combinations and also as individual components. Mask Only.
ALTERNATIVE STOCK PRODUCT JSP FORCE 8 & PRESS TO CHECK FILTERS
Delivery Options:
FREE DELIVERY OVER £ 75 NET
Half mask respirators enclose both the nose & mouth & as such are termed half masks. Half masks are made from natural or synthetic rubber that allows sufficient flexibility for facial contours. Every half mask is required to reach the EN 140:1998 safety standard & will protect against both very fine particulates & gases when used with the correctly selected mask filters for the hazard.
Half mask respirators with the P3 filter (FFP3 Equivalent) provide an APF 20 which is the correct grade of protection against viruses such as Covid 19 & SARS.
Half masks have been designed to be worn for long periods however as per HSE guidance regular breaks should be taken after less than an hour of continuous use as the RPE may start to feel uncomfortable. This reduces the risk that the user will loosen the straps thus reducing the seal & protection.
All half mask respirators used on a regular basis should be thoroughly checked at least once a month. If the half mask dust respirator is only used occasionally it should be examined carefully before use.
Depending on the filter selected, Half face masks will provide an APF 4 (P1 Filter), APF 10 (P2 Filter) & an APF 20 (P3 Filter).
Half masks will also protect against gases/vapours including organic/inorganic fumes & acid gases as well as ammonia & mercury. The correct fume filter for the hazard encountered can be found in our mask filter category.
Half mask respirators should not be used in oxygen deficient environments.
Always follow the manufacturers RPE advice when using the mask however generally a good seal can be checked by covering the inlet valve / filter with your hand, inhaling & holding your breath for circa 10 seconds. The mask suction should not loosen. If it does loosen readjust the head hardness straps & retry until a good seal has been achived.
It is the company’s legal responsibility to ensure their RPE wearers have been face fitted. Protective Masks Direct ltd provide face fitting across the whole of the UK.