Jet Stream Switch & Go Unit Gas/Vapour A2 Filter
The Jetstream® Switch & Go Gas/Vapour GV-X Version (with Nylon Hood).
Jetstream® Switch & Go pack GV-X Contains: A2 Filter, Hose, Charger, Carry Case, Battery, White Nylon Headtop, Flow Meter & UK Plug.
Filter Performance: Offers an assigned protection factor (APF) of 20 x Work place Exposure Limit (WEL) for organic vapours and gases and for very fine dusts, fibres, fumes and aqueous mists.
Christmas-New Year Dispatch Dates:
- 21st December midday cut off.
Any orders placed after this date will be processed.
- 28th December midday cut off.
- 29th December midday cut off.
- Next dispatch date: 4th January 2023.
- Whilst standard delivery is stated as 1-3 days we are currently delivering over 99% of orders the next business day as a standard service if placed before 2.30 pm.
Delivery Options:
- Standard Delivery: (1-3 business days) (£ 5.75 - £ 6.20)
- Next Business Day Delivery: (Order Must be placed before 2 pm) (£ 9.50 ex vat)
- Next Day Working Day Delivery Pre 12 delivery (Order Must be placed before 2 pm): £ 11.50 ex vat
- Next Working Day Delivery Pre 10.30 delivery (Order Must be placed before 2 pm): £ 13.95 ex vat
- Weekend Delivery Options:
- Saturday Delivery: (Order Must be placed before 12 pm) £ 22.50 ex vat
FREE DELIVERY OVER £ 75 NET
- The free delivery over £ 75 net is only available for UK mainland.
- Deliveries to Islands and highlands are a 2-3 day delivery option only & charged at £ 16 ex vat.
Frequently Asked Questions
01: What are the different Powered Air Purifying Respirators (PAPR)?
There are 2 types of powered air respirators (PAPR), these can either be as:
1) Battery Powered Air Respirator where a battery-powered filter (either waist or head-mounted) draws air through the filter and pumps clean air to the user.
2) A supplied Air Respirator where a clean air supply is gently regulated to the user via a breathing tube from a compressor.
Battery powered masks are classified into three protective categories TH1, TH2, TH3 with TH1 equating to a protection factor APF 10, TH2 APF 20 & TH3 APF 40. Powered respirators must meet the European safety standard EN146 & EN12941 to be allowed to be used safely in the UK.
Air-supplied respirators must meet the European safety standards EN270 & EN1835 incorporating the hood top & helmet supplied with air from a compressor. The adjustable continuous flow regulator must also have a low warning device enabled.
02: Which is the Best Powered Respirator?
The main manufacturers are 3M, Sundstrom & JSP who produce a range of hooded & helmet topped powered respirators. The fan units are mainly waist-mounted however the new powered respirator, the Kite Airhood contains the fan in the head unit so there are no external breathing tubes. If there is a concern that tubes could be snagged, the Kite Airhood would be the power respirator mask to select.
03: What are Battery Powered Respirators?
Powered air respirators are battery-powered with a fan unit that can either be waist-mounted or head-mounted. The filtered air is then delivered to the chosen headpiece which can be either a hood or hard head top. The main manufacturers of powered air respirators are JSP PAPR with the switch & go system all in one pack, the 3M PAPR such as the 3M Versaflo TR315 starter unit with a selected head top which can be either hood or hard helmets such as the 3M 306 & the Sundstrom PAPR comprising of the Sundstrom SR 500 Power unit with either the SR 530 head top or the SR 570 helmet.
The benefits of a battery-powered respirator are the flexibility of movement with the whole unit attached to the user allowing the user to walk freely without trailing breathing tubes. Battery-powered units cannot however be used to protect against poor warning materials (Where the hazard cannot be smelt or tasted).
If protection is required against materials that cannot be tasted or smelt a supplied-air regulator is required whereby breathable air is supplied from a compressor via a breathing tube.
Recommended Battery Powered Air Respirators:
Recommended Waist Mounted Powered Air Masks:
JSP PAPR Switch & Go Respirator (hood) (Ready to use)
Protection Level: APF 20 TH2
JSP PAPR Constructor Kit (Helmet) (Ready to use)
Protection Level: APF 20 TH2
3m PAPR TR 315 Starter Unit & M306 Helmet
Protection Level: APF 40 (TH3)
3m PAPR TR 315 Start Unit & 3M Versaflo Head Top S-433L
Protection Level: APF 40 (TH3)
Sundstrom SR 500 Power unit & SR 570 Helmet Head Top
Protection Level: APF 200 (TH3)
Sundstrom SR 500 & SR 530 Hood Top
Protection Level: APF 200 (TH3)
Recommended Head-Mounted Powered Air masks:
Kite Airhood Powered Air Mask (Ready to Use) (No Breathing Tubes)
Protection Level: APF 20 (TH2)
04: Can Powered Air Purifying Respirators be used for people with beards?
Powered air masks are the only masks that can be used for personnel with beards. Depending on the size of the beard, either a hood head top or a helmet head unit can be selected.
05: Can Supplied Air Respirators be used for people with beards?
Supplied air masks/ head tops are the only masks that can be used for personnel with beards. Depending on the size of the beard, either a supplied-air hood unit or a helmet head unit can be selected.
06: Do Powered Respirators need to be face fitted?
Powered respirator masks are an enclosed system where air is pumped around the mask unit vi a powered fan. PAPR masks do not require face fitting.
07: Are there Dual Purpose Powered Air & Supplied Air Head tops?
The following head tops whether hood or hard helmet can be used with both the battery unit or air valve regulator with a compressed air unit.
This allows complete flexibility to use the head top either with supplied air from a compressor and also with a powered air waist-mounted battery fan unit if more freedom of movement is required.
Recommended Dual Purpose Powered Air & Supplied Air Head tops:
3m M306 Helmet
Protection Level: APF 40 (TH3)
3M Versaflo Head Top S-433L
Protection Level: APF 40 (TH3)
Sundstrom SR 570 Helmet Head Top
Protection Level: APF 200 (TH3)
Sundstrom SR 530 Hood Top
Protection Level: APF 200 (TH3)
08: What is required to use a dual-purpose head unit with a supplied-air compressor?
The head tops should already include a breathing tube and so only an air valve regulator would be required to regulate air supplied from a compressor. A 3M head top would require the 3M Versaflo valve and the Sundstrom head tops would require the Sundstrom valve regulator unit.
09: My head top needs a breathing tube to connect to the Air compressor, which one do I require?
If the dual-purpose head top requires a breathing tube to connect to the compressor & regulator valve the 3m masks would require the 3m BT40 Breathing tube and the Sundstrom masks would require the Sundstrom breathing tubes.
The European safety standard incorporating breathing tubes is the EN1835 standard & covers three classes LDH1, LDH2 & LDH3 (LDH= Light Duty Hose) (HDH = Heavy Duty Hose)