Sundstrom SR100 Half Mask & P3 Filter

Rating:
100% of 100

Sundstrom SR100 half mask (Inc P3 Filter) is made of silicone with each mask equipped with two exhalation valves, which ensure very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit. Tested in accordance with EN 140:1998. Nominal protection factor 50. P3 Filters included. Price £ 33.74 Ex Vat.

 

SKU#:
1056
Availability: In stock
SKU
1056

Sundstrom SR100 Half Mask Respirator

Sundstrom SR100 half mask is made of silicone with each mask equipped with two exhalation valves, which ensure very low exhalation resistance.

Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist.

The easily adjustable elastic head harness of the Sundstrom mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit. Carry case and spare filters & pre filters available.

Tested in accordance with EN 140:1998

Nominal protection factor 50. P3 Filters are included.

Price £ 33.74 Ex Vat Sundstrom Mask & P3 Filter

Product Code H01-2012 SR 100 M/L

 

 

Write Your Own Review
You're reviewing:Sundstrom SR100 Half Mask & P3 Filter
Your Rating

Delivery Options Available:

  • Standard Delivery: 2-3 Days - (£4.95-£ 6.20)
  • Next Day Delivery: £6.95
  • Saturday Delivery:(Order Before 2pm Friday) (FREE OVER £ 200)
  • Sunday Delivery:(Order before 2pm Friday) (FREE OVER £ 200)
  • Free Delivery Over £ 70 - Excludes Islands, Highlands & Channel Islands
 

Frequently Asked Questions

01. What Sundstrom Mask or Filters are Required for Spray Painting?

  • The Sundstrom half mask can be fitted with the SR 217 / 218 A filter in combination with the SR510 P3 filter.
  • If the full kit is required the Sundstrom SR Spray Painters Kit (SKU 282) contains the mask & all necessary filters.

02. What Sundstrom Half Mask and / or Filters are Required for Chemical Spraying?

  • The Sundstrom reusable mask can be fitted with the SR 297 filter in combination with the SR510 P3 filter for combined ABEK1P3 protection.
  • If the full kit is required the Sundstrom SR Chemical Spray Kit (SKU 283) contains the mask & all necessary filters.

03. What Sundstrom Reusable Half Mask and / or Filters are Required for Paint Stripping?

  • The Sundstrom SR 100 & P3R filter (SKU 1056) is the correct mask & filter protection for paint stripping removal.

04. How do you correctly don the SR100 Reusable Mask?

  • Check exhalation & inhalation valves are in good condition & correctly fitted.
  • Holding the Sundstrom half mask in one hand grab the strap buckle & pull the head strap until the pad is tight against the mask.
  • Holding the strap buckle, pull the strap over the head and put around neck.
  • Grab the pad with one hand and the filter with the other and whilst holding onto the mask place onto the face chin first & over the nose & mouth area.
  • Pull the head strap over the head to sit on the crest of the head so that the straps form a V shape.
  • If the mask needs to be adjusted, pull the straps outwards & tighten the head harness at the buckle until the mask sits comfortably against the face.

05. How can you check there is a good seal between Sundstrom SR 100 half mask & Face?

  • Place your hand lightly over the hole on the pre filter holder.
  • Take a deep breath & hold for 10 seconds. If the mask is tight, it will be pressed against the face.
  • If any leakage is apparent, adjust the head harness straps and repeat seal check. Also check the inhalation & exhalation valves if these have previously been removed.

06. How do you clean & maintain the Sundstrom SR100 Half mask?

  • Remove the filter, the pre filter & pre filter holder as well as the covers for the exhalation valves & membranes & head harness.
  • Sundstrom cleaning tissues SR 5226 are recommended for daily care to clean & disinfect
  • If the Sundstrom half mask is heavily soiled, immerse in warm water (up to 40C) & mild detergent & use a soft brush to clean. Rinse in clean water & allow to air dry.
  • Critical areas are the exhalation membranes & seats which must be clean & undamaged.
  • Inspect all parts and replace with new parts if necessary. The service kit (SKU 320) contains spare membranes & valves.